Instructions
Table Of Contents
- Anybus® Communicator™ - PROFIBUS to Modbus RTU/Serial
- Table of Contents
- 1. Preface
- 2. Safety
- 3. Preparation
- 4. About Anybus Communicator
- 5. Installation
- 6. Configuration Quick Guide
- 7. Communicator Configuration
- 7.1. Connect the Communicator
- 7.2. Access the Built-In Web Interface From HMS IPconfig
- 7.3. Access the Built-In Web Interface From a Web Browser
- 7.4. Communicator Built-In Web Interface Overview
- 7.5. General Subnetwork Settings
- 7.6. About Transaction Templates
- 7.7. Build Transaction Template
- 7.8. Nodes and Transactions
- 7.9. High Level Network Settings
- 7.10. I/O Data Map
- 7.11. Apply Configuration
- 7.12. To Use an Existing Configuration
- 7.13. To Use an Communicator Classic Configuration
- 8. PLC Configuration
- 9. Verify Operation
- 10. Use Cases
- 11. Maintenance
- 12. Troubleshooting
- 13. Technical Data
- 14. Reference Guides
13. Technical Data
For complete technical specicaons and regulatory compliance informaon, please visit
www.anybus.com/support.
13.1. Technical Specicaons
Arcle idencaon ABC3000-A
Communicaon connector PROFIBUS DSUB connector
Conguraon connector RJ45
Serial connector 7-pin screw connector
Power connector 3-pin screw connector
Power supply 12-30 VDC, Reverse voltage protecon and short circuit protecon
Power consumpon Typical: 160 mA @ 24 V Max: 400 mA @ 12 V
Storage temperature -40 to +85 °C
Operang temperature -25 to +70 °C
Humidity EN 600068-2-78: Damp heat, +40°C, 93% humidity for 4 days
EN 60068-2-30: Damp heat, +25°C – +55°C, 95% RH, 2 cycles
Vibraon See datasheet
Housing material Plasc, See datasheet for details
Protecon class IP20
Product weight 150 g
Dimensions 27 x 144 x 98 mm (H x W x D) with connectors included
Mounng DIN-rail
For addional technical data and informaon related to the installaon and use of this product, please visit
www.anybus.com/support.
Anybus
®
Communicator
™
- PROFIBUS to Modbus RTU/Serial Technical Data
Page 130 of 134 SCM-1202-177 1.2