Instructions
Table Of Contents
- 1 Preface
- 2 Safety
- 3 Preparation
- 4 About Anybus Communicator
- 5 Installation
- 6 Configuration Quick Guide
- 7 Communicator Configuration
- 7.1 Connecting the Communicator
- 7.2 Access the Built-In Web Interface From HMS IPconfig
- 7.3 Access the Built-In Web Interface From a Web Browser
- 7.4 Communicator Built-In Web Interface Overview
- 7.5 General Subnetwork Settings
- 7.6 About Transaction Templates
- 7.7 Build Transaction Templates
- 7.8 Nodes and Transactions
- 7.9 High Level Network Settings
- 7.10 Naming the Host
- 7.11 Station Name
- 7.12 I/O Data Map
- 7.13 Apply Configuration
- 7.14 Use an Existing Configuration
- 8 PLC Configuration
- 9 Verify Operation
- 10 Use Cases
- 11 Maintenance
- 12 Troubleshooting
- 13 Technical Data
- A Reference Guides
Use Cases
104 (124)
Procedure
1. Add an Empty consume template and select it.
2. Name the template Read Barcode Data.
3. In the Frame editor, add four frame field with the following settings:
Consume frame fields
Frame
fields
Name Type
Value Fixed field
Maximum
payload
length
Process
data
delimiter
Subnet
delimiter
End
pattern
Variable
data
Barcode
Data
N/A N/A
Yes, set
here
31 bytes
None None 0
Constant Carriage
Return
character
(CR)
Byte (1
byte)
13 Yes, set
here
N/A N/A N/A N/A
Constant
Line Feed
character
(LF)
Byte (1
byte)
10 Yes, set
here
N/A N/A N/A N/A
Anybus
®
Communicator
™
User Manual
SCM-1202-176 1.0 en-US