Instructions
Table Of Contents
- 1 Preface
- 2 Safety
- 3 Preparation
- 4 About Anybus Communicator
- 5 Installation
- 6 Configuration Quick Guide
- 7 Communicator Configuration
- 7.1 Connecting the Communicator
- 7.2 Access the Built-In Web Interface From HMS IPconfig
- 7.3 Access the Built-In Web Interface From a Web Browser
- 7.4 Communicator Built-In Web Interface Overview
- 7.5 General Subnetwork Settings
- 7.6 About Transaction Templates
- 7.7 Build Transaction Templates
- 7.8 Nodes and Transactions
- 7.9 High Level Network Settings
- 7.10 Naming the Host
- 7.11 Station Name
- 7.12 I/O Data Map
- 7.13 Apply Configuration
- 7.14 Use an Existing Configuration
- 8 PLC Configuration
- 9 Verify Operation
- 10 Use Cases
- 11 Maintenance
- 12 Troubleshooting
- 13 Technical Data
- A Reference Guides
Maintenance
110 (124)
11.3.3 Firmware File Validation
Before the firmware file is imported into the system, the firmware upgrade function perform a
validation of the file, to ensure that:
• the firmware is compatible with the Communicator hardware
• the firmware is suited for the product
• that the officially HMS software signatures are valid
• that the firmware file is not corrupt or damaged
If the firmware file does not pass the validation, the firmware file is rejected and an error
message appear.
11.3.4 Update Firmware
Before You Begin
To eliminate the risk of interference with plant operation, firmware update is only
available when the Communicator is disconnected from the OT networks.
Ensure that the Communicator is disconnected from the OT networks.
Procedure
To update the firmware:
1. On the Files & firmware page, click Upload.
2. In the Upload Firmware window, click Select firmware (.hiff).
3. In the Open dialog box, browse to and select the firmware file and click Open.
4. To start the firmware upgrade, click Update firmware.
→ The firmware file is validated and transferred.
Result
→ If the firmware file pass the validation: The firmware is upgraded and then the
Communicator automatically reboots, for the upgrade to take effect.
→ If the firmware file is rejected: An error message appear.
Anybus
®
Communicator
™
User Manual
SCM-1202-176 1.0 en-US