Instructions
Table Of Contents
- 1 Preface
- 2 Safety
- 3 Preparation
- 4 About Anybus Communicator
- 5 Installation
- 6 Configuration Quick Guide
- 7 Communicator Configuration
- 7.1 Connecting the Communicator
- 7.2 Access the Built-In Web Interface From HMS IPconfig
- 7.3 Access the Built-In Web Interface From a Web Browser
- 7.4 Communicator Built-In Web Interface Overview
- 7.5 General Subnetwork Settings
- 7.6 About Transaction Templates
- 7.7 Build Transaction Templates
- 7.8 Nodes and Transactions
- 7.9 High Level Network Settings
- 7.10 Naming the Host
- 7.11 Station Name
- 7.12 I/O Data Map
- 7.13 Apply Configuration
- 7.14 Use an Existing Configuration
- 8 PLC Configuration
- 9 Verify Operation
- 10 Use Cases
- 11 Maintenance
- 12 Troubleshooting
- 13 Technical Data
- A Reference Guides
Troubleshooting 111 (124)
12 Troubleshooting
12.1 Diagnostics
12.1.1 Serial RS-232/485 Data Monitor
On the Serial RS-232/485 page you can monitor how the data flow between the nodes and the
gateway changes over time.
The table can contain at most 10000 messages. When the limit is reached, the oldest messages
are discarded when new messages are added.
Choose how data is displayed
To choose if the data should be displayed in Hexadecimal, Decimal or ASCII, click Hex, Dec or
Ascii.
Start and Stop Data flow
• To start the data flow, click Start.
• To end the data flow, click Stop.
Export data flow
To export the data flow, click Export.
→ An Excel file with the data flow is downloaded to your PC.
Anybus
®
Communicator
™
User Manual
SCM-1202-176 1.0 en-US