Instructions
Table Of Contents
- 1 Preface
- 2 Safety
- 3 Preparation
- 4 About Anybus Communicator
- 5 Installation
- 6 Configuration Quick Guide
- 7 Communicator Configuration
- 7.1 Connecting the Communicator
- 7.2 Access the Built-In Web Interface From HMS IPconfig
- 7.3 Access the Built-In Web Interface From a Web Browser
- 7.4 Communicator Built-In Web Interface Overview
- 7.5 General Subnetwork Settings
- 7.6 About Transaction Templates
- 7.7 Build Transaction Templates
- 7.8 Nodes and Transactions
- 7.9 High Level Network Settings
- 7.10 Naming the Host
- 7.11 Station Name
- 7.12 I/O Data Map
- 7.13 Apply Configuration
- 7.14 Use an Existing Configuration
- 8 PLC Configuration
- 9 Verify Operation
- 10 Use Cases
- 11 Maintenance
- 12 Troubleshooting
- 13 Technical Data
- A Reference Guides
Appendix A: Reference Guides 122 (124)
A.4 Modus Exception Codes
Exception Code
Name
Description
01
Illegal Function The server does not recognize or permit the function code.
02
Illegal Data Address The data address (register, discrete input or coil number) is not an
permitted address for the server.
If multiple registers were requested, at least one was not permitted.
Reference: MODBUS Application Protocol Specification V1.1b3, April 26 2012
For more information refer to the Modbus organisation website.
A.5 ASCII Table
A.6 RS485/RS232 Electrical Connection
A.6.1 RS485 Typical Connection
Anybus
®
Communicator
™
User Manual
SCM-1202-176 1.0 en-US