Instructions
Table Of Contents
- 1 Preface
- 2 Safety
- 3 Preparation
- 4 About Anybus Communicator
- 5 Installation
- 6 Configuration Quick Guide
- 7 Communicator Configuration
- 7.1 Connecting the Communicator
- 7.2 Access the Built-In Web Interface From HMS IPconfig
- 7.3 Access the Built-In Web Interface From a Web Browser
- 7.4 Communicator Built-In Web Interface Overview
- 7.5 General Subnetwork Settings
- 7.6 About Transaction Templates
- 7.7 Build Transaction Templates
- 7.8 Nodes and Transactions
- 7.9 High Level Network Settings
- 7.10 Naming the Host
- 7.11 Station Name
- 7.12 I/O Data Map
- 7.13 Apply Configuration
- 7.14 Use an Existing Configuration
- 8 PLC Configuration
- 9 Verify Operation
- 10 Use Cases
- 11 Maintenance
- 12 Troubleshooting
- 13 Technical Data
- A Reference Guides
About Anybus Communicator 12 (124)
Examples:
If you have a common read transaction. Then you can create one single transaction template for
the read transaction and reuse it multiple times times on your node(s).
If you have a function code in your protocol similar to a standard Modbus RTU transaction. Then
you can create a transaction template based on the Modbus RTU transaction for the read
operation. When you reuse the template on your node(s), you only have to change the function
code each time it is used.
Anybus
®
Communicator
™
User Manual
SCM-1202-176 1.0 en-US