Instructions
Table Of Contents
- 1 Preface
- 2 Safety
- 3 Preparation
- 4 About Anybus Communicator
- 5 Installation
- 6 Configuration Quick Guide
- 7 Communicator Configuration
- 7.1 Connecting the Communicator
- 7.2 Access the Built-In Web Interface From HMS IPconfig
- 7.3 Access the Built-In Web Interface From a Web Browser
- 7.4 Communicator Built-In Web Interface Overview
- 7.5 General Subnetwork Settings
- 7.6 About Transaction Templates
- 7.7 Build Transaction Templates
- 7.8 Nodes and Transactions
- 7.9 High Level Network Settings
- 7.10 Naming the Host
- 7.11 Station Name
- 7.12 I/O Data Map
- 7.13 Apply Configuration
- 7.14 Use an Existing Configuration
- 8 PLC Configuration
- 9 Verify Operation
- 10 Use Cases
- 11 Maintenance
- 12 Troubleshooting
- 13 Technical Data
- A Reference Guides
Configuration Quick Guide 25 (124)
4. Finding the Communicator on your PC
The Communicator default IP address is
192.168.0.10.
Option 1
On the PC accessing the Communicator
built-in web interface, set a static IP
address within the same IP address range
as the Communicator IP address.
Option 2
Change the IP address on the
Communicator configuration port to one
within the same IP address range as your
PC.
Use the software application HMS
IPconfig to find the Communicator default
IP address on your PC.
Download the installation files and user
documentation from
www.anybus.com/support.
5. Access the Communicator built-in web interface
Open the Communicator built-in web
interface in HMS IPconfig or enter the
Communicator IP address in your web
browser.
The Communicator built-in web interface
overview page opens in your browser.
Anybus
®
Communicator
™
User Manual
SCM-1202-176 1.0 en-US