Instructions
Table Of Contents
- 1 Preface
- 2 Safety
- 3 Preparation
- 4 About Anybus Communicator
- 5 Installation
- 6 Configuration Quick Guide
- 7 Communicator Configuration
- 7.1 Connecting the Communicator
- 7.2 Access the Built-In Web Interface From HMS IPconfig
- 7.3 Access the Built-In Web Interface From a Web Browser
- 7.4 Communicator Built-In Web Interface Overview
- 7.5 General Subnetwork Settings
- 7.6 About Transaction Templates
- 7.7 Build Transaction Templates
- 7.8 Nodes and Transactions
- 7.9 High Level Network Settings
- 7.10 Naming the Host
- 7.11 Station Name
- 7.12 I/O Data Map
- 7.13 Apply Configuration
- 7.14 Use an Existing Configuration
- 8 PLC Configuration
- 9 Verify Operation
- 10 Use Cases
- 11 Maintenance
- 12 Troubleshooting
- 13 Technical Data
- A Reference Guides
Configuration Quick Guide 27 (124)
4. High level network configuration
On the PROFINET page:
a. Use Automatic I/O sizes provided by
the subnetwork or choose to set
them manually.
Max I/O size is 1024 bytes.
b. Enable DHCP server or choose to set
a specific IP address.
c. Apply the IP settings.
d. To be able to identify the
Communicator on the PROFINET
network, give the Communicator a
Station name.
5. I/O Data Mapping
The transactions you added to the nodes
are automatically mapped to the
Communicator internal memory area.
View the added nodes and transactions
on the I/O data map page.
Anybus
®
Communicator
™
User Manual
SCM-1202-176 1.0 en-US