Instructions
Table Of Contents
- 1 Preface
- 2 Safety
- 3 Preparation
- 4 About Anybus Communicator
- 5 Installation
- 6 Configuration Quick Guide
- 7 Communicator Configuration
- 7.1 Connecting the Communicator
- 7.2 Access the Built-In Web Interface From HMS IPconfig
- 7.3 Access the Built-In Web Interface From a Web Browser
- 7.4 Communicator Built-In Web Interface Overview
- 7.5 General Subnetwork Settings
- 7.6 About Transaction Templates
- 7.7 Build Transaction Templates
- 7.8 Nodes and Transactions
- 7.9 High Level Network Settings
- 7.10 Naming the Host
- 7.11 Station Name
- 7.12 I/O Data Map
- 7.13 Apply Configuration
- 7.14 Use an Existing Configuration
- 8 PLC Configuration
- 9 Verify Operation
- 10 Use Cases
- 11 Maintenance
- 12 Troubleshooting
- 13 Technical Data
- A Reference Guides
Configuration Quick Guide 28 (124)
6.3 PLC Configuration
In the Communicator built-in web interface:
1. Export I/O data map
When you configure the communication
between the Communicator and the PLC,
you can use the I/O data map as a
specification to ensure that the
transactions match.
On the I/O data map page: You can
download the I/O data mapping in a
spreadsheet to your PC.
2. Download GSDML File
Option if the PLC program requires a
GSDML (Generic Station Description
Markup Language) file.
On the PROFINET page: Download the
GSDML file to your PC.
Anybus
®
Communicator
™
User Manual
SCM-1202-176 1.0 en-US