Instructions
Table Of Contents
- 1 Preface
- 2 Safety
- 3 Preparation
- 4 About Anybus Communicator
- 5 Installation
- 6 Configuration Quick Guide
- 7 Communicator Configuration
- 7.1 Connecting the Communicator
- 7.2 Access the Built-In Web Interface From HMS IPconfig
- 7.3 Access the Built-In Web Interface From a Web Browser
- 7.4 Communicator Built-In Web Interface Overview
- 7.5 General Subnetwork Settings
- 7.6 About Transaction Templates
- 7.7 Build Transaction Templates
- 7.8 Nodes and Transactions
- 7.9 High Level Network Settings
- 7.10 Naming the Host
- 7.11 Station Name
- 7.12 I/O Data Map
- 7.13 Apply Configuration
- 7.14 Use an Existing Configuration
- 8 PLC Configuration
- 9 Verify Operation
- 10 Use Cases
- 11 Maintenance
- 12 Troubleshooting
- 13 Technical Data
- A Reference Guides
Communicator Configuration 35 (124)
7.4 Communicator Built-In Web Interface Overview
Use the Communicator built-in web interface to configure, maintain and troubleshoot the
Communicator.
Home
View the Communicator, network and node status.
Apply After configuration changes are made and verified,
press Apply to make the settings take effect.
Serial RS-232/485
Serial Subnetwork with Nodes.
Select a Serial protocol, use Modbus RTU standard transactions or create your own
transaction templates.
Configure communication and add nodes and transactions.
PROFINET
High Level Network with Client. Configure I/O Size, IP settings and Station Name.
I/O data map
View the added transactions mapped to the Communicator internal memory area.
Files & firmware Save settings in a configuration files, upload configuration files and upgrade firmware.
Diagnostics
Monitor and troubleshoot the Communicator.
Support
Contains Communicator product information, Anybus contact information,
link to Anybus support website, and product file for download.
Here you can generate a support package with product information, to send to your
Anybus support technician.
Anybus
®
Communicator
™
User Manual
SCM-1202-176 1.0 en-US