Instructions
Table Of Contents
- 1 Preface
- 2 Safety
- 3 Preparation
- 4 About Anybus Communicator
- 5 Installation
- 6 Configuration Quick Guide
- 7 Communicator Configuration
- 7.1 Connecting the Communicator
- 7.2 Access the Built-In Web Interface From HMS IPconfig
- 7.3 Access the Built-In Web Interface From a Web Browser
- 7.4 Communicator Built-In Web Interface Overview
- 7.5 General Subnetwork Settings
- 7.6 About Transaction Templates
- 7.7 Build Transaction Templates
- 7.8 Nodes and Transactions
- 7.9 High Level Network Settings
- 7.10 Naming the Host
- 7.11 Station Name
- 7.12 I/O Data Map
- 7.13 Apply Configuration
- 7.14 Use an Existing Configuration
- 8 PLC Configuration
- 9 Verify Operation
- 10 Use Cases
- 11 Maintenance
- 12 Troubleshooting
- 13 Technical Data
- A Reference Guides
Communicator Configuration 37 (124)
7.5.2 Communication Basic Settings
Physical standard
Specify the physical interface type for the device connected to the Communicator.
1. Select a physical standard from the Physical standard drop-down menu.
Setting Value Description
Physical standard
RS-232
Default standard
Use RS-232 when one single node is connected to the subnetwork.
RS-485
Use RS-485 when multiple nodes are connected to the subnetwork.
Baud rate
Specify the baud rate; the serial transfer speed, maximum bits per second.
2. Select a baud rate value from the Baud rate drop-down menu.
Setting Value
Baud rate 1200 baud
1800 baud
2400 baud
4800 baud
9600 baud | Default value
19200 baud
35700 baud
38400 baud
Anybus
®
Communicator
™
User Manual
SCM-1202-176 1.0 en-US