Instructions
Table Of Contents
- 1 Preface
- 2 Safety
- 3 Preparation
- 4 About Anybus Communicator
- 5 Installation
- 6 Configuration Quick Guide
- 7 Communicator Configuration
- 7.1 Connecting the Communicator
- 7.2 Access the Built-In Web Interface From HMS IPconfig
- 7.3 Access the Built-In Web Interface From a Web Browser
- 7.4 Communicator Built-In Web Interface Overview
- 7.5 General Subnetwork Settings
- 7.6 About Transaction Templates
- 7.7 Build Transaction Templates
- 7.8 Nodes and Transactions
- 7.9 High Level Network Settings
- 7.10 Naming the Host
- 7.11 Station Name
- 7.12 I/O Data Map
- 7.13 Apply Configuration
- 7.14 Use an Existing Configuration
- 8 PLC Configuration
- 9 Verify Operation
- 10 Use Cases
- 11 Maintenance
- 12 Troubleshooting
- 13 Technical Data
- A Reference Guides
Communicator Configuration 77 (124)
7.12.7 Live List
By default Live list is disabled.
When Live list is enabled, the first four bytes of process data on the PROFINET network contain
the live list.
The Live list holds 32 bits.
Each bit in the Live list can hold the status for a total of 32 nodes connected to the
Communicator.
The bit is 0 when the bit does not correspond to the configured node. For example, this occurs
when the number of configured nodes is less than 32.
Each bit is 1 when the corresponding node is online.
Anybus
®
Communicator
™
User Manual
SCM-1202-176 1.0 en-US