Instructions
Table Of Contents
- 1 Preface
- 2 Safety
- 3 Preparation
- 4 About Anybus Communicator
- 5 Installation
- 6 Configuration Quick Guide
- 7 Communicator Configuration
- 7.1 Connecting the Communicator
- 7.2 Access the Built-In Web Interface From HMS IPconfig
- 7.3 Access the Built-In Web Interface From a Web Browser
- 7.4 Communicator Built-In Web Interface Overview
- 7.5 General Subnetwork Settings
- 7.6 About Transaction Templates
- 7.7 Build Transaction Templates
- 7.8 Nodes and Transactions
- 7.9 High Level Network Settings
- 7.10 Naming the Host
- 7.11 Station Name
- 7.12 I/O Data Map
- 7.13 Apply Configuration
- 7.14 Use an Existing Configuration
- 8 PLC Configuration
- 9 Verify Operation
- 10 Use Cases
- 11 Maintenance
- 12 Troubleshooting
- 13 Technical Data
- A Reference Guides
PLC Configuration 83 (124)
8.3 Configure the PROFINET Connection
Before You Begin
• Configure the Communicator, refer to Communicator Configuration, p. 31.
• Download the PROFINET GSDML file from the Communicator built-in web interface, refer to
Export Product GSDML File, p. 82.
Procedure
To configure the PROFINET connection:
1. Import the PROFINET GSDML file into your PLC configuration tool.
2. Select the input module and output module.
Ensure that the I/O data sizes match the I/O data sizes configured on the Communicator
built-in web interface PROFINET page, refer to To Use Automatic I/O Sizes, p. 67 and To
Configure I/O Sizes Manually, p. 67.
Anybus
®
Communicator
™
User Manual
SCM-1202-176 1.0 en-US