Instructions
Table Of Contents
- 1 Preface
- 2 Safety
- 3 Preparation
- 4 About Anybus Communicator
- 5 Installation
- 6 Configuration Quick Guide
- 7 Communicator Configuration
- 7.1 Connecting the Communicator
- 7.2 Access the Built-In Web Interface From HMS IPconfig
- 7.3 Access the Built-In Web Interface From a Web Browser
- 7.4 Communicator Built-In Web Interface Overview
- 7.5 General Subnetwork Settings
- 7.6 About Transaction Templates
- 7.7 Build Transaction Templates
- 7.8 Nodes and Transactions
- 7.9 High Level Network Settings
- 7.10 Naming the Host
- 7.11 Station Name
- 7.12 I/O Data Map
- 7.13 Apply Configuration
- 7.14 Use an Existing Configuration
- 8 PLC Configuration
- 9 Verify Operation
- 10 Use Cases
- 11 Maintenance
- 12 Troubleshooting
- 13 Technical Data
- A Reference Guides
Use Cases
97 (124)
4. In the Frame editor Response area, add six frame fields with the following settings:
Response frame fields
Frame field
Name
Bytes/
Length
Type/
Checksum type
Endianess Fixed field Value
Constant
Function code
1 Byte
N/A
Yes
N/A
Node address Node ID
1 Byte
N/A N/A N/A
Constant
Index
2
Word (two
bytes)
Big-endian
No Min 0
Max 1000
Constant
Sub index
1 Byte
N/A
No Min 0
Max 255
Data Data 2 Byte
N/A
Yes
N/A
Checksum Checksum
2 CRC
N/A N/A N/A
Anybus
®
Communicator
™
User Manual
SCM-1202-176 1.0 en-US