Information

1. Overview
This guide describes how to replace the Communicator Classic with the new Communicator.
Essenally, there are three main parts to take into consideraon:
1. Physical dierences: power and network connectors are not in the same place, and the conguraon port is
dierent.
2. Conguraon conversion: locang your old conguraon and imporng it into the new communicator.
3. Network conguraon le update: how to locate the new GSD/GSDML/EDS le for your network and update
the PLC (master).
The goal is to have the new Communicator up and running with a conguraon originally from the old
Communicator Classic. The screeshot below shows the desired view, where the new Communicator successfully
is using the converted conguraon.
Overview Replacing Communicator Classic with New Communicator
SCM-1202-190 1.0 Page 1 of 8