Information

Configuration 21 (26)
3. Change the Communicator network variant.
a. In the Files & firmware page Firmware management section, click
Upload.
b. In the Upload Firmware window, click Select firmware (.hiff).
c. In the Open dialog box, browse to and select the firmware file and
click Open.
d. To start the firmware upgrade, click Update firmware.
→ The firmware file is validated and transferred.
→ The Communicator reboots and is reset to the factory default
settings for the Communicator network variant you have updated
to.
4. Configure the Communicator.
a. Open the Communicator built-in web interface.
You can open the built-in web interface in HMS IPconfig or by entering
the Communicator IP address in your web browser.
b. The built-in web interface takes you through the steps to configure
the Communicator.
For in-depth information about the configuration, refer to the user
manual for the installed Communicator network variant.
Anybus
®
Communicator
™
Startup Guide
SP2953 1.0 en-US