Manual

10.2. AC Motor Drive - Custom Request/Response Use Case
10.2.1. About the Use Case
The purpose of this use case is to explain how to use the Custom Request/Response serial protocol.
Figure 92. AC Motor Drive - Custom Request/Response Use Case
In this use case we use the Communicator to enable data exchange between an AC motor, of the type My Drive,
and a PLC.
The use case describes how to map the communicaon in the Communicator.
My Drive is connected to the serial subnetwork via a custom RS-485 protocol.
The PLC is connected to an EtherNet/IP network (high level network).
We use the Custom Request/Response serial protocol and create customized transacon template to map up:
• Status word and actual speed from My Drive to the EtherNet/IP network.
• Control word and speed from the EtherNet/IP network to My Drive.
10.2.2. Before You Begin
• Connect the Communicator conguraon port to your computer.
• Power on the Communicator.
• Ensure that your computer can nd the Communicator IP address.
• Enter the Communicator built-in web interface of the.
For more informaon refer to Communicator Conguraon (page 34).
Anybus
®
Communicator
™
- EtherNet/IP
™
to Modbus RTU/Serial AC Motor Drive - Custom Request/Response Use Case
Page 102 of 133 SCM-1202-152 Version 1.12