Manual

10.3. Barcode Scanner - Custom Produce/Consume Use Case
10.3.1. About the Use Case
The purpose of this use case is to explain how to use the Custom Produce/Consume serial protocol.
Figure 99. Barcode Scanner - Custom Produce/Consume Use Case
In this use case we use the Communicator to enable data exchange between an Barcode Scanner and a PLC.
The use case describes how to map the communicaon in the Communicator.
The Barcode Scanner is connected to the serial subnetwork via a custom RS-232 protocol.
The PLC is connected to an EtherNet/IP network (high level network).
We use the Custom Produce/Consume serial protocol and create a customized transacon template.
10.3.2. Before You Begin
• Connect the Communicator conguraon port to your computer.
• Power on the Communicator.
• Ensure that your computer can nd the Communicator IP address.
• Enter the Communicator built-in web interface of the.
For more informaon refer to Communicator Conguraon (page 34).
Anybus
®
Communicator
™
- EtherNet/IP
™
to Modbus RTU/Serial Barcode Scanner - Custom Produce/Consume Use Case
Page 110 of 133 SCM-1202-152 Version 1.12