Manual
Table Of Contents
- Anybus® Communicator™ - EtherNet/IP™ to Modbus RTU/Serial
- Table of Contents
- 1. Preface
- 2. Safety
- 3. Preparation
- 4. About Anybus Communicator
- 5. Installation
- 6. Configuration Quick Guide
- 7. Communicator Configuration
- 7.1. Connect the Communicator
- 7.2. Access the Built-In Web Interface From HMS IPconfig
- 7.3. Access the Built-In Web Interface From a Web Browser
- 7.4. Communicator Built-In Web Interface Overview
- 7.5. General Subnetwork Settings
- 7.6. About Transaction Templates
- 7.7. Build Transaction Template
- 7.8. Nodes and Transactions
- 7.9. High Level Network Settings
- 7.10. I/O Data Map
- 7.11. Configuration Notes
- 7.12. Apply Configuration
- 7.13. To Use an Existing Configuration
- 7.14. To Use an Communicator Classic Configuration
- 8. PLC Configuration
- 9. Verify Operation
- 10. Use Cases
- 11. Maintenance
- 12. Troubleshooting
- 13. Technical Data
- 14. Reference Guides
Custom Produce/Consume
Figure 27. Produce transacon template example
The transacon named Read Barcode Data Template consists of a number of frame elds.
The Transacon type can be Produce or Consume. In this example the Transacon type Consume is selected.
In the frame eld we have added one Variable data eld and two Constant elds.
7.6.2. Transacon Template Types
There are two types of transacon templates, Empty template and Modbus template.
Empty Template
When using the Empty template, you start with an empty transacon and build a desired structure by adding
and arranging frame elds.
Figure 28. Transacon template, Empty template
Anybus
®
Communicator
™
- EtherNet/IP
™
to Modbus RTU/Serial About Transacon Templates
Page 44 of 133 SCM-1202-152 Version 1.12