Manual

Convert Between Big-Endian and Lile-Endian
To convert between big-endian and lile-endian you must reverse the byte order.
Figure 66. I/O data map, Endian swap
To reverse the byte order:
1. In the web-interface le sidebar menu, click I/O data map.
2. In the data map, select the transacon for which you want to do swap the byte order.
3. Select the endian swap type from the Endian swap drop-down menu.
Seng Descripon
No swapping Default seng
No swapping is performed on the data.
Bytes Swap 2 bytes
A B C D becomes B A D C
Words Swap 4 bytes
A B C D becomes C D A B
Bytes and words A B C D becomes D C B A
4. To apply the sengs, click Apply in the web-interface header, and follow the instrucons.
I/O Data Map Anybus
®
Communicator
™
- EtherNet/IP
™
to Modbus RTU/Serial
SCM-1202-152 Version 1.12 Page 79 of 133