Data Sheet

The Anybus Wireless Bolt IoT gives devices,
machines and equipment Internet connection.
This solution uses the latest LTE standards
NB-IoT and CAT-M1 and ts both stationary and
mobile equipment.
Wireless Bolt IoT™
The innovave hardware form-factor with its M50 through-
hole mount enables eecve access to good cellular connec-
vity, without losing coverage due to long and lossy antenna
cable. The Bolt IoT is up-to-date with the latest 4G LTE
standards NB-IoT and CAT-M1 and, to be globally eecve, it
uses 2G (GPRS/EDGE) failback enabling deployment almost
anywhere in the world.
Key use cases
• Internet access for any machine or device with an Ethernet
port
• Low Power/Sleep mode for connecng baery/wind/solar
powered equipment
• Internet access using CAT-M1/NB-IoT for other HMS
equipment including Anybus, Ewon, Intesis and Ixxat products
Features and benets
• Intuive and interesng form-factor; M50 through-hole
mount on any at surface
• World-wide coverage on a single module with industry and
mobile network cercaons
• LPWA Global 13 band LTE NB-IoT, LTE CAT-M1 and GPRS/EDGE
failback
• Ultra-Low Power Mode; Reduce power consumpon for
baery or solar/wind powered applicaons
• Host interface RJ45 with 10/100 Mbit/s Ethernet
• PoE (Power over Ethernet) opon, single cable with both
power and communicaon
• Transparent transfer of any TCP/UDP based protocol
• Built-in rewall, NAT and DHCP server
• SIM card slot with eSIM opon
Availability
AWB1000
Anybus Wireless Bolt IoT black
AWB1001
Anybus Wireless Sunbolt IoT white top and black base
Availability: Pending