Data Sheet
Table Of Contents
- 1 Preface
- 2 Safety
- 3 Preparation
- 4 Installation
- 5 Configuration
- 6 Configuration Examples
- 7 Verify Operation
- 8 Maintenance
- 9 Troubleshooting
- 10 Technical Data
Configuration 24 (46)
5.8.3 Lock Configuration
When configuration is locked, you can still access and use the Wireless Bolt IoT built-in web
interface but the settings can not be configured.
On the System page:
Fig. 19 Restore Settings from a backup file
To lock the configuration:
1. Click Config Lock.
2. To confirm lock configuration, click OK.
5.8.4 Unlock Configuration
To unlock configuration, do a factory reset using the Wireless Bolt IoT Reset button.
Refer to Reset and Recovery, p. 42.
Anybus
®
Wireless Bolt IoT
™
User Manual
SCM-1202-139 1.11 en-US