Data Sheet
Table Of Contents
- 1 Preface
- 2 Safety
- 3 Preparation
- 4 Installation
- 5 Configuration
- 6 Configuration Examples
- 7 Verify Operation
- 8 Maintenance
- 9 Troubleshooting
- 10 Technical Data
Troubleshooting 42 (46)
9.3 Reset and Recovery
9.3.1 Reset Button
Fig. 38 Reset button
The Reset button is located on the bottom of the Wireless Bolt IoT.
9.3.2 Factory Reset
Factory Reset will result in the loss of all configuration settings and logs.
Make sure that the Wireless Bolt IoT is connected to power.
Factory Reset Using the Reset Button
1. Use a pointed object (such as a ballpoint pen) to press and hold the Reset button for >10
seconds and then release it.
Result
→ Wireless Bolt IoT is reset to the factory default settings.
Anybus
®
Wireless Bolt IoT
™
User Manual
SCM-1202-139 1.11 en-US