Data Sheet

ManualsBrandsAnybus ManualsAutomationWireless Bolt IoT Wireless Bolt RJ-45, Ethernet, 2G, 4G, LTE 11 V DC, 33 V DC 1 pc(s)

Table Of Contents

SP2728 1.1 mul / 2020-12-16 / 21110

AWB1

Ethernet Connector RJ45 PoE

Data PoE

1 TD+ A+ 5 B+

2 TD- A+ 6 RD- A-

3 RD+ A- 7 B-

4 B+ 8 B-

Shield

Power Connector 3-pin

11–33 VDC

Functional Earth (FE)

Safety and Compliance Information

Warning Levels

WARNING

Instruction that must be followed to avoid a risk of death or serious injury.

Caution

Instruction that must be followed to avoid a risk of personal injury.

Anybus

Wireless Bolt IoT

™

SAFETY AND COMPLIANCE

INFORMATION

Summary of content (4 pages)

PAGE 1
SAFETY AND COMPLIANCE INFORMATION Anybus® Wireless Bolt IoT™ AWB1 Ethernet Connector RJ45 PoE Pin Data 1 TD+ 2 TD3 RD+ 4 PoE A+ A+ AB+ Pin 5 6 7 8 Data PoE B+ ABBFE RD- Shield Power Connector 3-pin 1 2 3 + - 11–33 VDC Functional Earth (FE) Safety and Compliance Information Warning Levels WARNING Instruction that must be followed to avoid a risk of death or serious injury. Caution Instruction that must be followed to avoid a risk of personal injury. © 2020 HMS Industrial Networks SP2728 1.
PAGE 2
Anybus® Wireless Bolt IoT™ Safety and Compliance Information 2 (4) General Safety Instructions Caution If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. Caution This product contains parts that can be damaged by electrostatic discharge (ESD). Use ESD prevention measures to avoid damage. Intended Use The intended use of this equipment is as a communication interface and router.
PAGE 3
Anybus® Wireless Bolt IoT™ Safety and Compliance Information 3 (4) For use in North America and/or Canada: The unit shall be supplied by an isolated power source which fulfils the requirements of Limited-Energy Circuit in accordance with UL/CSA 61010-1/ UL/CSA 61010-2-201 or Limited Power Source (LPS) in accordance with UL/CSA 60950-1 or a Class 2 supply source which complies with the National Electrical Code (NEC), NFPA 70, Clause 725.121 and Canadian Electrical Code (CEC), Part I, C22.1.
PAGE 4
Anybus® Wireless Bolt IoT™ Safety and Compliance Information 4 (4) CE Compliance This product is in compliance with the Radio Equipment Directive 2014/53/EU and the RoHS Directive 2011/65/EU with amendment 2015/863 through conformance with applicable standards. The Declaration of Conformity is available at www.anybus.com/support Disposal and recycling You must dispose of this equipment properly according to local laws and regulations.