Instructions

AT Commands 16 (84)
3.3.13 AT*BUB Unbond
AT*BUB=
Un-bonds a previously bonded device.
Syntax:
AT*BUB=<bd_addr>
Input Parameters:
Name
Type Description
bd_addr MACAddress MAC address of the Bluetooth device to un-bond. If address
FFFFFFFFFFFF is selected, all bonded devices will be removed.
Note: Deleting seperate BLE devices is not supported, to delete BLE
device bonds FFFFFFFFFFFF have to be used.
Example:
Input: AT*BUB=8C8B83EE2ACB
3.3.14 AT*BLEM Low Emission Mode
Note: this command is not related to Bluetooth low energy.
AT*BLEM=
Set current Low Emission Mode. For default value see AT*AMDEFAULT.
Syntax:
AT*BLEM=<mode>,<store>
Input Parameters:
Name
Type Description
mode
Integer
The Low Emission mode to set:
0: Connection period: 10 000 ms Paging timeout: 2000 ms Inquiry
timeout: 5000ms
1: Connection period: 5000ms Paging timeout: 300 ms Inquiry
timeout: 600 ms
2: Connection period: 3000ms Paging timeout: 200 ms Inquiry
timeout: 300 ms
3: Connection period: 3000ms Paging timeout: 80 ms Inquiry timeout:
80 ms
4 - 63: Reserved 64: User specified times, see the ATS General Settings
S Register Manipulation command
store
Boolean If store is 1 the new value is stored permanently.
AT*BLEM?
Get the current Low Emission Mode. See AT*BLEM= for values.
Syntax:
AT*BLEM?
Example:
Input: AT*BLEM?
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide
SCM-1202-004 1.7 en-US