Instructions

AT Commands 38 (84)
3.6.4 AT*WSCC Close Connection
AT*WSCC
Close WLAN connection in Station mode. If there is no connection but a connect as specified by
the Connection List is in progress this is terminated.
Syntax:
AT*WSCC
Example:
Input: AT*WSCC, returns OK when the connection is closed.
3.6.5 AT*WSCP Connect Peer
AT*WSCP=
Connect to a WLAN AP.
Syntax:
AT*WSCP=<bssid>,<ssid>,<channel>
Input Parameters:
Name
Type Description
bssid MACAddress If specified the AP BSSID must match this value, if left blank the BSSID
is ignored.
ssid
String
The SSID of the AP to connect to. If not specified the AP BSSID must be
specified for a connection to be possible.
channel
Integer
The channel to use. 0 for any channel in the channel map.
Example:
Input: AT*WSCP=8C8B83EE2ACB,dut,0 will return OK if the connection
succeeds, ERROR otherwise.
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide
SCM-1202-004 1.7 en-US