User manual

Network Commands 11 (60)
4.2 AT*ANIP IP Settings
Set/get IP settings for the device
AT*ANIP=
Short description for AT*ANIP=
Syntax:
AT*ANIP=<ip_addr>,<netmask>,<gateway>,<store>
Input Parameters:
Name
Type Description
ip_addr NetworkAddress IP address for the device
netmask NetworkAddress Netmask for the device
gateway NetworkAddress The IP address of the gateway
store Boolean If store is 1 the new value is stored permanently.
Requires a reboot for the changes to take effect
AT*ANIP?
Get the IP settings
Syntax:
AT*ANIP?
Example:
AT*ANIP? *ANIP:<ip_addr>,<netmask>,<gateway>
Anybus
®
Wireless Bolt/Bridge II AT Commands Reference Guide SCM-1202-004 1.2