User manual

Bluetooth Classic Commands 24 (60)
5.19 AT*BLQ Read Link Quality
AT*BLQ=
Get the link quality for a connection.
Syntax:
AT*BLQ=<handle>
Input Parameters:
Name
Type Description
handle Integer The handle of the connection to get the link quality for.
Example:
AT*BLQ=<handle> *BLQ:<link_quality>
5.20 AT*BLP Limited Pairing
AT*BLP=
Enables or disables limited pairing, only valid for current power cycle. If the device should be
pairable after power cycle, see S register 2007.
Syntax:
AT*BLP=<enable>,<time_limit>
Input Parameters:
Name
Type Description
enable Boolean 0: Disable pairing
1: Enable. Pairing will be limited.
time_limit Integer The time (in seconds) the unit will be pairable. Valid time is 0 to 300
seconds. Values less than 0 will be treated as 0.
Anybus
®
Wireless Bolt/Bridge II AT Commands Reference Guide SCM-1202-004 1.2