User manual

Bluetooth Classic Commands 28 (60)
5.24 AT*BLCOD Local class of device.
AT*BLCOD=
Set the Bluetooth Local Class Of Device code.
Syntax:
AT*BLCOD=<cod>,<store>
Input Parameters:
Name
Type Description
cod Integer Valid values for this parameter are specified in the Bluetooth As-
signed Numbers Document, www.bluetooth.com. The parameter
has been divided into three segments, a service class segment, a
major device class segment and a minor device class segment (bits
2-7).
The default value is 131072 (Bit 17, Networking).
store
Boolean If store is 1 the new value is stored permanently.
AT*BLCOD?
Get the Bluetooth Local Class Of Device code.
Syntax:
AT*BLCOD?
Example:
AT*BLCOD? *BLCOD:<cod>
5.25 AT*BRCD Read Connected Devices.
AT*BRCD?
Retrieves the MAC address and handle of every connected Bluetooth device.
Syntax:
AT*BRCD?
Example:
AT*BRCD? returns *BRCD:<bd_addr>,<handle> for each connected device
followed by OK or ERROR.
Anybus
®
Wireless Bolt/Bridge II AT Commands Reference Guide SCM-1202-004 1.2