Instructions

AT Commands 32 (84)
3.4.6 AT*WWM WLAN World Mode
When WLAN World Mode is enabled only frequencies accepted all over the world is used. When
disabled local frequencies can be used but then the device must search for location during
startup which will increase the startup time. New channels must be added manually with
AT*WSCHL.
AT*WWM=
Configures WLAN World Mode 0: Disable WLAN World Mode 1: Enable WLAN World Mode
NOTE: When WLAN World Mode is disabled the startup time will increase.
Syntax:
AT*WWM=<wlan_world_mode>
Input Parameters:
Name
Type Description
wlan_world_mode
Integer
Enable/disable WLAN World Mode.
Requires a reboot for the changes to take effect.
Example:
Input: AT*WWM=0 disable WLAN World Mode.
AT*WWM?
Get WLAN World Mode, World Mode off (0) or World Mode on (1)
Syntax:
AT*WWM?
Example:
AT*WWM?<br>*WWM:<mode>
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide
SCM-1202-004 1.7 en-US