Data Sheet
Anybus Wireless Bolt - Ethernet RJ45 PoE
https://www.anybus.com/products/wireless-solutions/wireless-bridge/anybus-wireless-bolt---ethernet-rj45-poe
1/4
Anybus Wireless Bridge product
FEATURES AND BENEFITS
WIRELESS LAN INTERFACE
Anybus Wireless Bolt - Ethernet RJ45
PoE
Anybus Wireless Bolt enables you to connect industrial machines and devices to a wireless
network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®,
Bluetooth Low Energy® or Wireless LAN (WiFi).
On the wired side, the Anybus Wireless Bolt communicates over Industrial Ethernet, supporting
protocols such as BACnet/IP, PROFINET, EtherNet/IP, Modbus TCP as well as all TCP and UDP
based protocols.
CONFIGURE MACHINES WIRELESSLY
Anybus Wireless Bolt gives you direct access to configure or troubleshoot your machinery. With a
range of 100 meters you can access the internal web pages via a laptop, tablet or smartphone.
BYOD (Bring Your Own Device) means that you no longer need an expensive HMI. A machine
operator or technician does not need to be physically located at the machine to gain access.
AN ALL-IN-ONE SOLUTION
With Anybus Wireless Bolt you get an All-in-one package featuring, connector, communication
processor and integrated antenna in the same unit, with an exterior IP67 protection class.
Configure or troubleshoot industrial machinery over a wireless network
Increase flexibility and mobility. Eliminate expensive fixed HMI’s by using a laptop, tablet or smartphone
Connect to moving field equipment such as AGV’s (Automated Guided Veicles)
Fast Roaming (IEEE 802.11r), High link speed (IEEE 802.11n)
Full compatibility with Anybus Wireless Bridge — a wireless product for cable replacement
Connect to a Cloud Service of your choice or get live data and integrate it into a SCADA system
Supports Ethernet and protocols such as: BACnet/IP, EtherNet/IP, Modbus-TCP, PROFINET, TCP/UDP
Simultaneous operation of Bluetooth and Wireless LAN allowing for bridging between the two networks
Security features for a secure industrial operation
Dual power supply, PoE (Power over Ethernet) and/or 3-pole 19-36VDC connector
Available with white top Sunbolt enabling 30% higher surrounding temperature compared to black in direct sunlight.
Operation with Wirelesss LAN, Bluetooth classic and Bluetooth Low Energy.
CLI (Command Line Interface) for configuration and diagnostics
Wireless standards: WLAN 802.11 a, b, g, n, d.
Operation modes: Access point or Client
Wireless LAN bands: 2.4GHz and 5GHz
RF output power: 18 dBm EIRP (including antenna gain 3dBi)
Max number of slaves for access point: 7