User manual

Bluetooth Classic Commands 30 (60)
5.28 AT*BCLW Write an entry in the Connection list
AT*BCLW=
Writes an entry in the Connection list. NOTE: If store is set to 1 all entries in the connection list
will be stored.
Syntax:
AT*BCLW=<index>,<bd_addr>,<name>,<role>,<store>
Input Parameters:
Name
Type Description
index Integer The index of the entry to write.
bd_addr MACAddress If specified the MAC address of the remote Bluetooth device must
match this value.
name
String If name is specified and S register 2017 is 1 the remote name must
match this value exactly. If S register 2017 is 0 this is a case sensi-
tive substring of the remote name to connect to, e.g. if specified to
DUT it will try to connect to DUT, DUTx, xDUT and xDUTx, but not
to dut.
role Integer The role of the remote device:
100: PAN User role, PAN Profile
101: Network Access Point role, PAN Profile
103: PAN, This will first try to connect to PANU, and if it fails, con-
nect to NAP, All others:Reserved
store Boolean If store is 1 the new value is stored permanently.
Example:
AT*BCLW=0,00026F668FA8,dut1,101,1 OK
Anybus
®
Wireless Bolt/Bridge II AT Commands Reference Guide SCM-1202-004 1.2