Datasheet
Industrial networking made easy! www.anybus.com
Wireless Bridge II™
Anybus Wireless Bridge enables you create a robust
wireless connecon between two points in an industrial
Ethernet network. This second generaon of the
proven and trusted product can communicate via both
Bluetooth and WLAN and is ideal for communicaon
through hazardous areas or hard-to-reach locaons
where cables are not desirable.
Wirelessly bridge industrial Ethernet networks
Use the Anybus Wireless Bridge to create a wireless connecon
in a PROFINET, EtherNet/IP, Modbus-TCP or BACnet/IP network.
You can use the same hardware for both Bluetooth or WLAN
communicaon.
Point-to-point or multipoint
Anybus Wireless Bridge is oen used as an Ethernet cable
replacement (point-to-point communicaon). But it can also
be used as an access point for several WLAN/Bluetooth nodes
within range.
Features and benets
• Range up to 400 meters.
• Rugged design with IP65-classed housing.
• Easy conguraon via push buon or via web conguraon
pages.
• Full compability with Anybus Wireless Bolt — a wireless
product for machine mounng.
• Connects to your machine via Ethernet.
• Simultaneous operaon of Bluetooth and WLAN allowing
for bridging between the two.
Which wireless standard?
Use WLAN (aka WiFi) if you need:
• High data throughput.
• Wireless access point.
Use Bluetooth if you need:
• Reliable and noise immune wireless link
(Bluetooth switches between dierent
frequencies).
• Low energy consumpon (Bluetooth Low
Energy).
Note that Bluetooth cannot be used with
some Android devices.
Availability
AWB3000
Ethernet bridge via Bluetooth and WLAN.
2.4 GHz/5 GHz. Internal antenna.
AWB3010
Ethernet bridge via Bluetooth and WLAN.
2.4 GHz/5 GHz. External antenna.
Accessories
023040
Cable kit. 1.5m Ethernet cables M12/RJ45 and
power supply (world).
024700
M12 Connector Kit with screw terminals.
024701
DIN Clip kit with screws.
024702
Extra external antenna. Foldable, dual band. RP-
SMA connector.
1.04.0085.00000
Magnec antenna foot with 1,5 m cable and RP-
SMA connector, excl. antenna.
1.04.0085.00003
Screw-mount antenna base with 2 m cable and
RP-SMA connector, excl. antenna)
EXAMPLE 1: Point-to-point
Ethernet cable
HMS provides a
full 3 year product
guarantee
Ethernet cable
Ethernet cable
EXAMPLE 2: Access point
Replacing an industrial Ethernet cable.
The Wireless Bridge can act as an access point connecng up to seven dierent slaves.
This example shows connecon to several Anybus Wireless Bolts. (The Anybus Wireless
Bridge and Bolt work seamlessly together.)
Bluetooth/WLAN
Bluetooth/WLAN
Client
Client
Client
Any
TCP/IP-based
protocol