Personal GPS Locator Users Manual (ACT200-D) CDMA VEHICLE TRACKER Users Manual NOV, 2011 ACT200-D, V0.2 AnyDATA AnyTime AnyPlace Any Wireless Data Solutions™ All Rights Reserved.
Personal GPS Locator Users Manual (ACT200-D) AnyDATA CDMA ACT200-D Copyright © 2009 AnyDATA Corp. All Rights Reserved. Any part of this document may not be distributed, communicated, reproduced or transmitted in any form or by any means, electronic or mechanical or otherwise, for any purpose, without the permission of AnyDATA Corp. This document can be subjected to revision without further notice. Contact Address Headquarter AnyData Corporation 5 Oldfield, Irvine, CA 92618, http://www.anydata.
Personal GPS Locator Users Manual (ACT200-D) Contents Contents 3 Figures 4 Tables 4 1 Introduction 5 1.1 Purpose ......................................................................................................................... 5 1.2 Technical Detail ...................................................................................................... 5 1.3 Revision History ......................................................................................................
Personal GPS Locator Users Manual (ACT200-D) Figures Figure 2.1: Package Contents ............................................................................................... 6 Figure3.1: External Interface............................................................................................. 8 Figure4.1: Installation of ACT200-D in vehicle ......................................................... 9 Tables Table 1.1: Revision History ...............................................................
Personal GPS Locator Users Manual (ACT200-D) 1 INTRODUCTION 1.1 PURPOSE This manual discusses the purpose and usage of the Vehicle GPS Locator (ACT200-D). 1.2 TECHNICAL DETAIL Please refer to Technical Manual.pdf for a more detailed description of the ACT200-D. 1.3 REVISION HISTORY The revision history for this manual is shown in Table 1.1. Table 1.1: Revision History Version Date Description v 0.1 V 0.2 Initial Release – ACT200-D RF Exposure Warning changed. All Rights Reserved.
Personal GPS Locator Users Manual (ACT200-D) 2 PHYSICAL CONTENTS Figure 2.1: Package Contents The box should contain: • One ACT200-D Vehicle GPS Tracker • One User Guide If any of items on Figure 2.1 are missing, please contact AnyDATA or distributor/reseller where device was purchased. All Rights Reserved.
Personal GPS Locator Users Manual (ACT200-D) 3 DESCRIPTION: VEHICLE GPS LOCATOR (ACT200-D) 3.1 THE LATEST IN GPS TECHNOLOGY Utilizing both assisted and standalone GPS, ACT200-D is able to determine your location via a combination of cell triangulation and the greatest number of GPS satellites available. ACT200-D charges via the included USB wall charger. ACT200-D is equipped with a battery life of 3-7 days with normal usage. 3.
Personal GPS Locator Users Manual (ACT200-D) Figure3.1: External Interface All Rights Reserved.
Personal GPS Locator Users Manual (ACT200-D) 4 HANDING THE VEHICLE GPS LOCATOR 4.1 SET-UP 1. Most of vehicle has an OBD-II (On Board Diagnostics) connector, which is located within 2 feet of the steering wheel. 2. The installation is very easy, just put the ACT200-D to the OBD-II connector in user vehicle. 3. The ACT200-D will power on automatically from vehicle battery and start initiation for CDMA network access. Figure4.1: Installation of ACT200-D in vehicle 4.
Personal GPS Locator Users Manual (ACT200-D) 5 POWERING ON/OFF THE VEHICLE GPS LOCATOR 5.1 POWERING ON/OFF To Power ON: 1. Insert the device to OBD-II connector. 2. Then, the device has automatically powered on. 3. There is no visual way to confirm whether device has power-on or not. 4. But, user can make sure the location from web-server, or application. To Power OFF: 1. If the device is needed for totally power-off, then just remove it from the OBD-II connector. 2.
Personal GPS Locator Users Manual (ACT200-D) 6 VEHICLE GPS LOCATOR SPECIFICATIONS 6.1 FORM FACTOR • Dimensions : 75 x 45 mm, 26mm in Height • Weight 48.4g 6.2 HARDWARE SPECIFICATIONS • Full TIA/EIA/IS-98D Compliance Assisted & Standalone GPS • Operating Voltage 12 ~ 14V, internally 3.9V for CDMA module. • Max Output Power 0.3W • Current Consumption Idle mode (50mA @ 13V) • Sleep mode (2mA @ 13V) • Sensitivity Less than -104dBm • Receive Frequency 869.04 ~ 893.97MHz for BC0, 1931.25 ~ 1988.
Personal GPS Locator Users Manual (ACT200-D) 6.
