User's Manual

AnyDATA.NET Inc. AnyTime AnyPlace Any Wireless Data Solution
TM
Table 4-5.4 USB Interface Pinouts
Pin # Pin Name Main Function Type Description
91 GPIO_29 USB_VBUS I
+5Vdc input or output depending upon
the type of peripheral device connected.
Default in input.
92 USB_OE_TP_N USB_CON_D_M B
Differential Data minus (-)
93 USB_SE0_VM USB_CON_ID I
Not in use
94 USB_DAT_VP USB_CON_D_P B
Differential Data plus (+)
USB host feature is not implemented, please contact [e-mail] for technical support.
4.6 General Purpose Interface
The general purpose interface is user-definable bi-directional pin. It can be configured as an
interrupt source. In addition, the GPIO pin can be used as output control pin from the module. The user
can define this pin properly as following.
Table 4-6 General Purpose Interface Pinouts
Pin # Pin Name Main Function Type Description
33 GPIO_17 GPIO_17 B
Programmable pull.
This pin can be programmed to No Pull,
Pull Up, or Pull Down.
98 NC GPIO_35 B
Programmable pull.
This pin can be programmed to No Pull,
Pull Up, or Pull Down.
All Rights Reserved.
AD-2001-06-28 Ver 1.1
-31-