User's Manual

AnyDATA.NET Inc. AnyTime AnyPlace Any Wireless Data Solution
TM
4.6.2.1 Power Down Registration Protocol for CDMA device
4.6.2.1.1 Using AT command (When Vcc is applied to +VEXT_DC)
After waiting for 12 seconds, the host device may shut down the power to DTG-2000.
Before powering off DTG-2000, send “AT+POWEROFF” to DTG-2000.
Device connected to DTG
-
2000
DTG
-
2000
4.6.2.1.2 Using POWER_ON (Pin 30) (Only when Vcc is applied to BATT_INT)
Status of POWER_ON(Pin 67)
L
HIGH
LOW
Booting stage. In normal operation Powering the module off. 2 sec
T1+12sec. Shut off the Vcc to DTG-2000
T1
All Rights Reserved.
AD-2001-06-28 Ver 1.1
-25-