User's Manual

Setup Instructions

1. Assign the mat to a patient. Visit the secure web portal (by

navigating to https://www.podimetrics.com/assign-device or

scanning the mat's QR code) to assign the mat to the patient.

Scan the QR code to assign the mat

2. Remove the mat from the box. With both hands, take the mat

out of the box, remove the protective plastic covering, and place

it upside down on a table for setup. Keep the box for storing the

charger and instructions, and for shipping the mat back to

Podimetrics after use. Don’t use the mat if it appears damaged or

contaminated.

3. Turn on the mat. Click on the power

button. The mat will chime to let you

know it’s ready to use.

4. Set the volume. There are four

volume settings, Off, Low, Medium,

and High. Press the volume UP or

volume DOWN button until the

audible tone is your preferred level.

5. Position the mat for use. Set the mat on a flat floor where it is

unobstructed by other objects and where you can comfortably

stand for at least 20 seconds. The gray side should be facing up.

It is recommended to place the mat beside your bed so you can

use it first thing in the morning.

CAUTION:

• Do not place the mat in a high-traffic area like a hallway or

doorway.

• Do not place the mat in a location where it is likely to get wet,

such as by a sink or shower.

• Do not place the mat in direct sunlight or next to heat sources

like vents or space heaters.

• Place the mat in a location that minimizes the risk of

tampering by children or pets.

Correct mat placement