User manual

11
5
According to practical application,you can set the radio works as
Amateur Transceiver mode or Professional Transceiver mode . There
are also 2 levels operation menu to set functions as you need. It is easy
and convenient
(From No.1 to No. 15 are channel function setup,From
No.15 to No.29 are general setting setup)
.
8PSLJOH.PEF
1.
#ZQSPHSBNNJOHTPGUXBSF"
In PC software's "General
Setting"menu ,choose "Display Mode" to select Amateur
Transceiver mode or Professional Transceiver mode.
#ZNBOVBMTFUVQ#
:Please refer to "Display Mode" in Page 24.
"NBUFVS5SBOTDFJWFS.PEF
2.
Except setting as "CH" mode, others
considered as Amateur transceiver mode. Under this mode,press
key to switch between Channel mode and VFO mode .
Professional Transceiver Mode
3.

When
set display mode as "CH",it enters
into Professional Transceiver mode.At
this mode,except scan,other shortcut
operation can't operate.And from No.1-
17 menu in function setting will be
auto-hidden,They should be set by
PC software.If there is corresponding
name for current channel,the LCD
will display current channel name
Otherwise,it shows current channel number. (As pic 4) (As pic 5)
Under every mode, from No. 18-29 menu in
4.
general setting can be
changed and saved.
9)20RGH)UHTXHQF\PRGHC. :
This mode shows only frequency
on the display. Shortcut operation
and Channel setting will be
changed & stored as the latest
value permanently.Once the radio is
turned off or changed to new VFO frequency, the latest setting is
remained until next change.(As pic 3)
If transceiver programmed as professional transceiver mode and
locked,you can't return to amateur transceiver mode by manual
operation from general setting.
(Pic 1)
(Pic 2)
(Pic 4)
(Pic 5)
)UHTXHQF\&KDQQHOPRGHA. : When set display as"FR",it enters
into Frequency+Channel mode, new
setting of channel operation and
shortcut operation can be temporarily
used by user. Once the radio is
turned off or switched to another
channel, the temporary setting will be
erased and back to initial settings.(As pic 1)
&KDQQHO1DPH7DJ0RGHB. : When set display as "NM",it enters
into Channel +Name Tag mode. At this mode, it will display
corresponding channel name when
the current channel is edited with
name. Otherwise, it will display
frequency + channel. Its operations
are the same as frequency + channel
mode.(As pic 2)
(Pic 3)
WORKING MODE (AMATEUR TRANSCEIVER OR PROFESSIONAL TRANSCEIVER)