User manual

25
8
menu, LCD displays"LAMP--25"
Turn selector knob to select the desired LCD backlight brightness
3.
1-32 total 32 level backlight brightness.
Press
4.
NH\WRFRQ¿UPDQGH[LW'HIDXOW
Pilot Frequency
This function uses to start repeater .It needs a certain intensity Pilot
Frequency to start
dormant repeater.As usual,no need to send pilot
frequency again once repeater started.
Press and hold
1.
key for over 2s to
enter general setting.
Press
2.
/ key to choose No.25
menu, LCD displays"TB--1750".
Turn selector knob to select the desired
3.
pilot frequency.
1750HZ:Pilot frequency1750HZ
2100HZ:Pilot frequency 2100HZ
1000HZ:Pilot frequency 1000HZ
1450HZ:Pilot frequency 1450HZ
Press
4.
NH\WRFRQ¿UPWKHVHOHFWLRQDQGH[LW'HIDXOW+=
Display Mode Setup
There are 3 different dispaly modes: Frequency+Channel mode,&
Channel mode&Channel+Name Tag mode, .
Press and hold
1.
key for over 2s to enter general setting menu.
Press
2.
/ key to choose No.26 menu, LCD
displays"DSP—FR".
Turn selector knob to select the desired
3.
mode.
FR:Frequency+Channel mode(Amateur
transceiver mode).
CH:Channel mode(Professional
transceiver mode).
NM:Channel+Name Tag mode(Amateur
transceiver mode),if channel not
named,it displays Frequency+Channel mode.
Press
4.
NH\WRFRQ¿UPDQGH[LW'HIDXOW)5
PIN Setup
Enable this function,you have to insert a matching PIN to enter
into normal status
when radio is turned on.(Pin setup by programme
software).
Press and hold
1.
key for over 2s to
enter general setting menu.
Press
2.
/ key to choose No.27
menu, LCD displays"CODE-OF".
Turn selector knob to enable/disable
3.
Pin setup.
ON: Turn on Pin setup
OFF:Turn off Pin setup
Press
4.
NH\WRFRQ¿UPDQGH[LW'HIDXOW2))
This function will be auto-hidden if channel mode locked.(Refer to
programme software)
General Setting