User's Guide

12
Priority Zone Switch to Priority Zone
Program Scan
"Press the key to start the scan in VFO channel
scan start and end frequency must be programmed
in CPS."
Enhanced
Sound
In digital channel, switch the microphone tone to
normal or enhanced mode.
LastCall Reply
In digital channel, press the key to access the last
call and press PTT
to call back.
Switch ChType
Switch the channel type(Analog, Digital, Ana+Dgi,
Dgi+Ana)
Ranging
When the radio receives a call and the suspension
time is on, press the key programmed as" Ranging"
to obtain the caller's position and distance. (Both
party need GPS positioned, or will receive only GPS
information)
Roaming
In standby, press the key programmed as "Roaming"
to search and lock on the repeater with strongest
signal. (Note: After lock on a repeater, the radio
will return to last frequency only after channel or
frequency is changed. The repeater frequency list
must pre- programmed in CPS.)
CH Ranging
In standby, if the call contact type for a channel
is "Single call" , press the key programmed as "
Channel Ranging" to turn on this function. The radio
will automatically start ranging function when turn to
this channel.
Max VOL Set
In standby, press the key programmed as" Max
Volume", will enable users to set the maximum RX
volume.
Slot Set
Choose Slot for current channel, this function is only
valid in repeater mode.
Aprs Type
Choose analog or digital Aprs Type for current
channel.
Zone Select
In standby, press the programmed "Zone Select"
key, it will allow you input the zone number and then
press conrm key will switch to the zone.
Roaming Set Enter into Roaming menu quickly