User's Guide

5
»
To
make the BT MODE work correctly, make sure the AT-
D578UV firmware is 2.04 or higher version. And the BT
software shall be V10043 or higher version.
»
Only
the AT-D578UV PRO/AT-D578UVIII PRO, AT-D578UV
PLUS/AT-D578UVIII PLUS with built-in bluetooth module, are
able to work at BT mode.
4.Basic Operation
4.1-
Power ON
Pre
ss the top
[POW]
button on microphone, the right green indicator
light on, later the screen displays "Select Port", press
or to
choose the connect mode:
BT MODE: Connect the BT01 microphone to AT-D578UV mobile
radio through Bluetooth.
CABLE MODE: Connect the BT01 microphone to AT-D578UV
mobile radio through 4m cable.
Click on "confirm" to select the connect mode.
4.2-
BT MODE connect to AT-D578UV
After
select "BT MODE
" on
microphone, it will display BT NAME and
"NO DEVICE CONNECTED" when no radio is connected. In this
state, the BT pairing shall be done on AT-D578UV.
a. Enter
into AT-D578UV radio Menu Bluetooth BT On/Off, set
it ON.
b.Switch
to AT-D578UV radio Menu Bluetooth BT Pairing,
select "Seek BT".
c.AT-D578UV radio displays "Seeking BT", it will take some time
to do the pairing.
d.AT-D578UV radio displays "ALL DATA CHECKING", the display
content of the AT-D578UV radio will be mapped to the Bluetooth
microphone.