User's Guide

6
»
O
nce the BT pairing is done, the BT microphone will
automatically connect to AT-D578UV radio after reboot.
4.3-
CABLE MODE connect to AT-D578UV
Af
ter select "CABLE MODE" on microphone, it will display "NO
DEVICE CONNECTED" when no radio is connected.
Use the 4m cable to connect the microphone to radio, AT-D578UV
displays "ALL DATA CHECKING", the display content of the AT-
D578UV radio will be mapped to the Bluetooth microphone.
A
T-D578UV radio displays "EXTERNAL CABLE MODE" on the
screen, BT01 microphone is able to access the radio menu and do
communications now.
In
Cable mode, the BT01 microphone is being charged when the
channel is free.
4.4-
Power Off
P
ress and hold the top
[POW]
button on microphone to turn off the
microphone. AT-D578UV radio will be powered off automatically
when BT microphone is off.
4.5-
Adjust The Volume
In s
tandby state, press the top
[POW]
button to switch the
[CH-]
/
[CH+]
button for volume adjust use.
When screen shows "UpDn Key: Vol Set
" ,
press
[CH-]
to reduce
the volume, press
[CH+]
to increase the volume.
e.AT-D578UV radio displays "EXTERNAL BT MODE" on the
screen, the pairing is done.
BT0
1 microphone is able to access the radio menu and do
communications now.