Manualshelf

Operating Manual

ManualsBrandsANYTONE ManualsElectronicsDMR Digital and Analog VHF/UHF Mobile Radio
11121314151617181920
18
Digital DMR and Analog UHF/VHF Two Way Radio
7.MAIN MENU FUNCTIONS
7.1 Talk Group
TG List: Will display the talk group list which had been programmed in the PC software.
This list is used as a look-up table to display the contact TG information when receiving a
call.
New Contact: Allows to create a new TG.
Manual Dial: Input the group ID or private ID to access a TG quickly. Press [#] key to
switch group ID or Private DMR ID.
Talker Alias: Allows Alias Tx Set / Alias Rx Display.
7.2 SMS
New Msg: Create a new message and send to a contact.
InBox: Shows all the received messages, and allows forward or delete the message.
OutBox: Shows all the sent messages, and allows resend, forward or delete of the
message.
Quick Text: Pre-saved messages, and allows to send, edit or delete the message.
Draft: Draft messages, and allows send, edit or deleting of the message.
7.3 Call Log
Last Call: The Last Call List show the last caller ID and time information.
It allows you save the last caller as a new contact if it is not in your contact.
Sent: The Sent List shows sent messages until selected and deleted.
Answered: Shows all the answered calls, and allows deleting the call record or saving
the ID as a new contact.
Missed: Shows all the missed calls, and allows deleting the call record or saving the ID
as a new contact.
7.4 Zone
7.4.1 Select a Zone
A Zone is a group of channels grouped together. The radio has 250 Zones. A Zone can
have the maximum of 160 analog and/or digital channels.
Operation 1: Press A/B key directly to switch the zone, the LCD will display the selected
zone number or name.
Operation 2:
Go to radio Menu - Zone, select a zone from the zone list, radio will change to selected
zone.
7.4.2 Add or delete a Zone
It allows you manually add or delete a zone in the zone menu directly.
7.5 Scan
In the PC software – Public – Scan list, it allows to save 250 scan lists, and to program
the required scan lists and write it into radio.
Switch the radio to channel mode, as the scan list is only valid in the channel mode.
7.5.1
Scan On/Off
Allows turn on or turn off scan manually.