Operating Manual

Digital DMR and Analog UHF/VHF Two Way Radio

8. RESET

A. Power off the radio.

B. Then power it on while holding the [P2] and the channel switch at the same time.

C. The radio will start up with a note on the display – "Are you sure you want to initialize

radio?"

Press Exit to exit the reset and power on the radio.

Press Conrm to proceed the reset, it will come with a screen display

note – Initialize Radio.

D. After a re-start the radio will display the setting of time zone and the date and the time.

Use the channel switch to set the current year. Move to the month by pushing the

channel switch. Set the month, and use the channel switch key to move forward each

step. Once done, click the Conrm key to save the date and time.

Please remember set up the time zone to avoid the date/time error.

Make sure the codeplug is saved to PC before your do the update and reset.