Operating Manual

10
4. RADIO OVERVIEW
The top LED will help you to identify the current radio status.
4.1
Status Indications
LED Indication Status
Flashes Red Low battery voltage
Constant Red Transmitting
Constant Green Analog Receiving
Constant Cyan Digital Receiving
Flashes Green Scan
4.2
Programmable Key
Method 2: In PC software – Public - Optional Setting - Key function.
set different functions for [PF1], [PF2], [PF3],
, keys.
OFF No Function
Voltage Check the current battery capacity voltage
Power Switch the power between super high, high, middle and low power.
Repeater Switch between talk around and repeater mode
Reverse Turn on/off the frequency reverse function.
Digital Encryption Choose the encryption group
Call
In Analog mode, send the DTMF/5TONE/2TONE encode. This function is
only valid for analog channel.
VOX Set up the VOX level
VFO/MR Switch between VFO mode and memory channel mode.
Sub PTT Sub channel PTT, press to start the call on sub channel
Scan Scan on/off
FM Radio FM radio on/off
Alarm Long press the key to start alarm, short press again to exit the alarm.
Record switch Enable/disable the recording function
Record
Start/stop recording. When stop recording, the radio will remind repeat or
send the record.
Messages In digital mode, press to enter into messages
Dial Start the manually dial
GPS Check the GPS position information
Monitor Monitor the weak signal or the signal with unmatched ID.
It is possible to
Method 1: In radio Menu - Settings - Radio Set - PF1, PF2, PF3, P1,P2
AT-D87 8UV Digital DMR and Analog UHF/VHF Two Way Radio