Operating Manual

9.2
Messages
9.3
Call Log
9.4
Scan
New Msg:
Create a new message and send to a contact.
InBox:
Shows all the received messages, and allows forward or delete the
message.
OutBox:
Shows all the sent messages, and allows resend, forward or
delete of the message.
Quick Text:
Pre-saved messages, and allows to send, edit or delete the
message.
Draft:
Draft messages, and allows send, edit or deleting of the message.
Sent:
Shows all the dialed calls, and allow deleting the call record or
saving the ID as a new contact.
Answered:
Shows all the answered calls, and allows deleting the call
record or saving the ID as a new contact.
Missed:
Shows all the missed calls, and allows deleting the call record or
saving the ID as a new contact.
In the PC software – Public – Scan list, it allows to save 250 scan lists, and
to program the required scan lists and write it into radio.
Switch the radio to channel mode, as the scan list is only valid in the
channel mode.
9.1
Contacts
Contacts List:
Will display the digital contact list which had been
programmed in the PC software. This list is used as a look-up table to
display the contact person information when receiving a call.
New Contact:
Allows to create a new digital contact.
Manual Dial:
Input the group ID or private ID to access a contact quickly.
9. MAIN MENU
9.4.1
Turn on Scan
a.
Press (Menu) to enter the main Menu.
b.
Select "SCAN"
c. Select "Scan On/OFF'
d. Select "On", the radio will start scan, press any key to stop scan.
24
AT-D87 8UV Digital DMR and Analog UHF/VHF Two Way Radio