Operating Manual

9. MAIN MENU
9.5.2
Chan Set
Č
Chan Set (Digital channel)
The channel set menu will change accordingly to the channel type.
When the channel type is digital, it will automatical hide the analog menus
.
(1)
Store Chan
Allows to store current channel and its setup.
b. Input channel name and confirm.
Channel set menu Route: Main Menu- Settings - Chan Set.
a. Select "Store Chan", then input channel number and confirm.
c. Selct a zone and confirm. The channel will stored.
(2)
Delete Chan
Allows to delte current channel.
b. press confirm, the current channel will deleted.
a. Select "Delete Chan",the radio will remind " Delete? "
Note: After delete one channel, the radio will move to next channel.
(3)
Channel Type
A-Analog : Set up to analog channel
D- Digital : Set up to digital channel
A+D TX A: Mixed analog, allow receive analog and digital signal, TX is
analog.
D+A TX D: Mixed digital, allow receive analog and digital signal, TX is
digital.
(4)
TX Power
Set up the TX power for current channel.
(6)
Band Width
Only narrow band 12.5KHz for digital channel.
(7)
RX Freq
Input the RX frequency by keypad, click the Menu key to save, press P2
key to return.
(5) Offset
TX Power
Press to adjust offset frequency.
/
31
UHF/VHF Two Way RadioAT-D87 8UV Digital DMR and Analog