Operating Manual

(23)

Slot Suit

Turn on Slot suit, the radio will receive calling from both slots. and able to

call back in corresponding slot.

Enable talk with other radio by repeat frequency throught repeaters.

Repeater:

Double Slot

When TX/RX frequency is same, turn on this function to communicate

by the slot set in simplex mode.

If DMR mode not choosed Doulbe Slot, the radio will work on

Slot in repeat mode. if choose Double Slot, it is necessary to

Double choose a slot by time slot setting.

Chan Set (Avaiable in Analog Channel only)

menu, The below listed menus are for analog channel only, unlisted menus are

are same as the digital channel, please refer to Chan Set( Digial Channel).

(4)

TCDT

Set up the CTCSS/DCS code for the TX.

(5)

RCDT

Set up the CTCSS/DCS code for the RX.

(6)

RTCDT

Set up the CTCSS/DCS code for both TX and RX

CTCSS code: 62.5Hz~254.1Hz, a total of 51 groups

DCS code: 000N~7771, a total of 1024 groups.

When the channel type is analog, it will automatially hide the digital

(7)

Optional Signal

Allows the set up of DTMF/5TONE/2TONE encode and decode for the

analog channels.

(10)

Squelch mode

When the analog channel is set up for both CTCSS/DCS decoding and

optional signaling, you can set up the RX condition in this menu.

9. MAIN MENU

AT-D87 8UV Digital DMR and Analog UHF/VHF Two Way Radio