TrackLight User and Installation Guide
Introduction truck.anytrek.com Thank you for purchasing the TrackLight GPS tracker from Anytrek. Your TrackLight provides the ultimate ‘plug and drive’ covert tracker providing the ability to track your asset in real time from any web connected device. It comes complete with an integrated SIM card for the tracking function and is simple and quick to install. With your TrackLight, you also have access to the Anytrek web portal, as well as the smartphone apps for both Android and iOS devices.
Installation truck.anytrek.com TrackLight has been designed to look, function and install exactly the same as a standard 4” LED tail light. It can be mounted using either a standard rubber grommet, stainless steel mounting ring or Anytrek’s Perma-Lock snap fit mounting ring. TrackLight connects to the vehicle’s standard wiring lead using a Fit N Forget connector. If your vehicle uses an earlier PL-3 connector, Anytrek offers adaptor cables that removes the need to cut the existing wiring leads.
Important truck.anytrek.com TrackLight connects to the tail light and brake light circuits in order to draw power. Please ensure that your TrackLight is fitted to an existing tail/brake light, and not a turning indicator or reversing light.
Installation truck.anytrek.com The following short video clip shows the installation process for a TrackLight GPS tracker using an existing rubber grommet. If the existing tail light is held in place with a steel mounting ring, it will have to be removed first. Click on the logo below to view the installation video on YouTube.
Activation Please follow the steps below to create your user account and register the tracker. If you already have an account for the Anytruck portal, log in, go to Device Manager and add your new tracker. 2. Enter required information. 1. Go to truck.anytrek.com and click on Sign up 3. Create your login credentials. 4. Register your tracker using the 6 digit passcode found on the label attached to the tracker.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment.
IC Warning - English: " This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. - French:" Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Selon les règlements d'Industrie Canada, cet émetteur radio ne peut fonctionner qu'à l'aide d'une antenne d'un type et d'un gain maximal (ou moindre) approuvé pour l'émetteur par Industrie Canada. Pour réduire les interférences radioélectriques potentielles avec d'autres utilisateurs, le type d'antenne et son gain doivent être choisis de telle sorte que la puissance équivalente rayonnée (p.i.r.e.) ne soit pas supérieure à celle nécessaire pour une communication réussie.
Support We’re never far away! For technical support either email us on; support@anytrek.
