User's Manual

ACT-VHF-I-500PA User Manual
ACT-VHF-I-500PA-USR-DOC-V1.1, 07/02/2019 Page 6 of 31
1 Product Appearance
1.1 Front Panel
 LAN
 Connector:10M/100M Ethernet
 Note:Ethernet port for web-based remote control
(ipaddress: 192.168.1.210, username/password: anywavecom/anywavecom)
 LED_PWR
 Green light will be on when the DC voltage of internal power supply is within the normal range
(48 VDC ~ 52 VDC).
 Green light will flash when the DC voltage of internal power supply is out of the normal range
(48 VDC ~ 52 VDC).
 Green light will be off when the external power supply is turned off, or internal power supply
module does not work.
 LED_RS485
 Green light will flash once per second when the internal communication is normal.
 Green light will stay constantly on or off when the internal communication is abnormal.
 LED_FWD
 Blue light will be on when RF_OUT has power output.
 Blue light will be off when the RF button is turned off, or the PA enters the auto-protection mode
and therefore shuts down its RF output. There are several situations which will result in
auto-protection mode, such as the input power is too high, the reflected power is too high, or the
temperature is too high.